MECHANICAL POWER PRESSES
|
|
Cross Shaft Power Presses
SX-Series |
| Even more
accurate, Even more dynamic, The Power presses that raise standards of precision &
rigidity. |
SPECIAL
FEATURES:
- Reduced noise and vibrations.
- Minimal frame gapping, low, angular deflection.
- High rigidity frame and bolster.
- High precision forming for longer die life.
- Hi-Torque pneumatically operated single disc combined
clutch and brake unit.
- Gear transmission runs in oil bath.
- Wide slide and bolster area.
|
 |
| FRAME &
BOLSTER: |
|
| Highly rigid
frame & wide point spacing |
 |
| The
highly rigid frame, slide & bolster hold the frame gap opening, frame elongation &
bed deflection to the absolute minimum. The wide point spacing enables these presses to
with stand eccentric loads. |
| 6-POINT
GIBS |
|
| The mechanism
that ensures high precision |
 |
| The high quality power shaft is employed to give outstanding torsional
rigidity. Long 6 point gibs, ensure that accuracy is maintained for a very long time. Die
life is also greatly extended. |
| CLUTCH
& BRAKE: |
|
| The
single disc clutch & brake maintains correct heat balance. A high torque level and
outstanding inching performance are ensured. |
 |
| HYDRAULIC
OVERLOAD PROTECTOR (OPTIONAL) |
|
| Prevents
damages to the press & dies. If the rated load is exceeded, the press stops
automatically to prevent damage to the press or dies. Since the hydraulic pressure can be
released easily, operations can be resumed smoothly even if jamming occurs. |
 |
| SLIDE
ADJUSTER: |
|
| Easy
to use motorised slide adjustment with digital display is provided as standard on SX-160,
200, 250, 315 & 400 models. The die height is displayed in units of 0.01 mm for
precise slide adjustment. |
 |
|
| TECHNICAL SPECIFICATION |
| |
