MECHANICAL POWER PRESSES

 Knuckle Joint Power Press
SKC Series

 
TECHNICAL SPECIFICATIONS:
MODEL SKC SKC-110 SKC-160 SKC-250 SKC-400 SKC-630
CAPACITY Tonnes 110 160 250 400 630
STROKE LENGTH mm 70 70 120 140 140
NO. OF STROKE/MIN   60 50 40 40 35
SLIDE ADJUSTMENT mm 10 15 15 15 15
SHUT HEIGHT OVER BOLSTER mm 250 280 370 400 400
BOLSTER AREA (LRXFB) mm 400X450 430X600 500X600 550X650 600X700
SLIDE AREA (LR X FB ) mm 300x300 360X400 400X400 400X500 450X550
BOLSTER THICKNESS mm 75 100 100 120 120
BOTTOM EJECTOR            
FORCE Tonnes 4 10 10 15 25
STROKE mm 30 30 40 50 50
             
MAIN MOTOR KW 5.5 7.5 11 15 22
  r.p.m 1500 1500 1500 1500 1500
             
SLIDE ADJ. MOTOR KW
Manual
 0.75 1.5 1.5 2.2
  r.p.m
---
 1000 1000 1000 1000
REQD. AIR PRESSURE atm 5.5 5.5 5.5 5.5 5.5
STANDARD ACCESSORIES 
* Centralized Automatic Lubrication
* Mechanical Knock out in the bed
* Mechanical knock out in the Slide
* Bolster Plate, Surge tank for Pneumatic Clutch and Brake
* Lub-air –ator for controlled moisture free and lubricated air to clutch and brake
* Set to hand tools
* Instruction manual
* Foot Switch
NOTE: Specification are subjected to change without notice for further design improvements accessories shown in illustrations in the catalogue may not be necessarily standard accessories.


<<Back