Milling Machines
UFM-1H : GEARED HORIZONAL MILLING HAVING X & Y AXIS AUTOMIC FEEDS.HARDENED AND GROUND TABLE AND GUIDEWAYS.
UFM-2S & 3S: GEARED UNIVERSAL MILLING MACHINES HAVING ALL THREE X,Y&Z AUTOMATIC FEEDS AND RAPID ON ALL THREE AXIS. HARDENED AND GROUND TABLE AND GUIDEWAYS.
Salient Features :
• Sturdy console type milling machine for finishing and roghing
• Hardened and ground table and guideways
• Autofeed on X, Y & Z axis
• Rapid on X, Y & Z axis
• Vertical head swivels +- 45
• Swiveling control panel
• Coolant system and central lubrication
• Machine base, knee & table of MEHANITE Cast Iron Construction
• Slide Ways are hardened, ground & coated with Turcite B [X & Y axis] for maximum wear resistant
• Table Surface is Hardened & Ground
• Highly accurate hard chromed & ground spindle
• Precision Internally ground Milling Head
• Pre Loaded Double Nuts ensure extremely smooth, high precision working & minimize backlash
• Dovetail guideways for 2S Models & Wide square guide on 'Y' axis of 4S & 5S Models
• Centralised Lubrication on all slideways maximizes life
• Head Swivels +- 360
• Autofeed on X & Y axes
• High Spindle Speeds
• Z axis rapid traverse
Lathe Machines
“PANTHER” 1350 & 1650 SERIES ALL GEARED PRECISION LATHE MACHINE CONFIRMING TO STANDARD OF GRADE 1 ACCURACY
Sailent Features : LATHE BED IS OF GRADE-20 CASTING, DULY FLAME HARDENED & GROUND WITH BRINELL HARDNESS OVER 300 BHN LATHE BED IS OF GRADE-20 CASTING, DULY FLAME HARDENED & GROUND WITH BRINELL HARDNESS OVER 300 BHN HEADSTOCK SPINDLE OF A2/4 MOUNTING IS HARDENED AND GROUND AND RUNS IN ANTI FRICTION TAPER ROLLER BEARINGS/ DROP WORM ARRANGEMENT FOR INSTANTANEOUS ENGAGEMENT AND DISENGAGEMENT OF POWER FEED SHEAR PIN COUPLING AS AN OVERLOAD SAFETY DEVICE FOR LEAD SCREW / SAFETY CLUTCH FOR FEED OVERLOAD UNIVERSAL GEAR BOX PROVIDES FOR WIDE RANGE OF INCH / MM THREADS & FEEDS/ ACCURACY IS TESTED AS PER IS : 1878 (PART - 1) 1971
“PANTHER” 3050 SERIES ALL GEARED PRECISION LATHE MACHINE CONFIRMING TO STANDARD OF GRADE – 1 ACCURACY
Sailent Features :
• LATHE BED IS OF CLOSE GRAINED ALLOY CASTINGS DULY FLAME HARDENED & GROUND WITH BRINELL HARDNESS OF OVER 300 BHN
• HEAD STOCK GEARS OF SPECIAL ALLOY STEEL DULY HARDENED AND PROFILE GROUND
• HEAD STOCK SPINDLE IS OF HARDENED AND GROUND AND RUNS IN ANTI FRICTION TAPER ROLLER BEARINGS
• QUICK CHANGE NORTON TYPE GEAR BOX PROVIDES WIDE RANGE OF INCH / MM THREADS & FEEDS
• SWITCH SHAFT FOR FORWARD / REVERSE ROTATION OF SPINDLE
• ACCURACY IS TESTED AS PER IS : 1878 (PART I) 1971.
“PANTHER” BRAND 2050 SERIES ALL GEARED PRECISION LATHE MACHINE, CONFIRMING TO STANDARD OF GRADE – 1 ACCURACY
Sailent Features :
• LATHE BED IS OF CLOSE GRAINED ALLOY CASTINGS DULY FLAME HARDENED AND GROUND WITH BRINELL HARDNESS OF OVER 300 BHN
• HEAD STOCK GEARS OF SPECIAL ALLOY STEEL DULY HARDENED AND PROFILE GROUND
• HEADSTOCK SPINDLE OF A 2/6 MOUNTING TYPE IS HARDENED AND GROUND AND RUNS IN ANTI FRICTION TAPER ROLLER BEARINGS
• QUICK CHANGE NORTON TYPE GEAR BOX PROVIDES WIDE RANGE OF INCH / MM THREADS & FEEDS
• SWITCH SHAFT FOR FORWARD / REVERSE ROTATION OF SPINDLE
• ACCURACY IS TESTED AS PER IS : 1878 (PART I) 1971.
“PANTHER” 4310 / 5610 / 6610 SERIES ALL GEARED HEAVY DUTY LATHE MACHINE WITH FLAME HARDENED GUIDEWAYS & ONE PIECE PLANNER TYPE BED
The 4310 / 5610 and 6610 6610 series
Heavy Duty Lathes are designed to provide optimum performance with high cutting power with versitality and used in a wide range of industries, general purpose machine-shop, mining and power industry, paper plants,ship yards etc. These lathes are built and tested for high accuracy standards.
• Single piece bed casting, planner type, for maximum rigidity
• Hardened and ground bed ways
• Large heavy duty head stock
• Removable gap bed
Panther Heavy Duty CNC Lathe - HDL Series
Flat Bed Construction, Induction Hardened & Ground Headstock Spindle, I41Siemens 802 DSL Controller is Standard, Hardened Steel Strips with 55-58 Rc provided on Bed Guideways, Hardened & Ground Headstock Gears, One Piece Planner Bed Construction for Maximum Rigidity & Stability
STANDARD ACCESSORIES
- 3 Ph Electric Motors
- Control panel
- Base Chip Tray
- Coolant Equipment
- Milling Arbour
- Machine lamp
- Tool kit
- Draw Bar
- Instruction Manual
- Electricals
- Control Panel and Arbour with Bushes ( for Universal Machines only)
- Draw Bar
- Tool box & Adjustment tools
- Centralised lubrication systems
- Coolant Panel
- Machine Lamp
- Operation Manual
- Electricals consisting of electric motor & control panel
- Machine lamp
- Electro collant pump with built-in tanl & fittings
- Milling Vice Adaptor
- Collets
- Horizontal Milling Attachment
- ELECTRIC MOTOR
- R/F SWITCH
- ‘V’ BELTS, 2 MT. CENTRES WITH CENTRE BUSH
- INCH & MM GEARS
- OIL CAN
- SPANNER
- ALLEN KEY SET & INSTRUCTION MANUAL
- HARDENDED GUIDEWAYS
- CENTRE BUSH
- OIL CAN
- SST OF ALLEN KEYS AND SPANNERS
- SCREW DRIVER AND INSTRUCTION MANUAL
- HARDENED GUIDEWAYS ELECTRICALS CONSISTING OF ELEC. MOTOR
- ‘V’ BELTS
- CONTROL PANEL
- CATCH PLATE
- INCH & MM GEARS
- 2MT DEAD CENTRES WITH CENTRE BUSH
- OIL CAN
- SET OF ALLEN KEYS SPANNERS
- 4 Way Programmable tool post
- Auto Lubrication system
- Semi Enclosure
- Coolant system
- Machine Light
- 3 Jaw chuck Diameter 500 mm
- Tool kit
- Instruction and spare parts manual
- Induction motor with Variable frequency drive for Spindle motor
- ELECTRICALS
- CONTROL PANEL
- 2 MT CENTERS WITH CENTER BUSH INCH & MM GEARS
- 4 Way Programmable tool post
- Auto Lubrication system, Semi Enclosure
- Coolant system, Machine Light
- 3 Jaw chuck Diameter 500 mm
- Tool kit
- Instruction and spare parts manual]
- Induction motor with Variable frequency drive for Spindle motor
Optional ACCESSORIES
- Milling Vice
- Milling Adoptor & Collets
- Rotary Milling Table
- 2 Axis D.R.O.
- 3 Axis D.R.O.
- Coolant Equipment
- Quartz Machine Lamp
- Heavy Duty Vertical Attachment (for FA – 3 U & FA 3U / 16 Models only)
- Machine Vice 160 mm
- Swivel Vice
- Universal Dividing Head
- Hand Feed Rotary Table Dia 300 mm
- ISO – 50 Milling Adaptor
- One Set of Collets (4, 6, 8, 10, 12, 16, 20 and 25 mm)
- Infinitely Variable power feeds in X,Y & Z axis
- Milling Adopter
- Collets
- Micro Boring head
- Milling Vice
- Horizontal Milling Attachment
- Motorised Lifting & Lowering for Z- Axis
- 2&3 Axes DRO
- D1-4, CAM LOCK SPINDLE IN LIEU OF STD SPINDLE
- 16 SPINDLE SPEEDS RANGING FROM 30 TO 1250 RPM
- 16 SPINDLE SPEEDS RANGING FROM 50 TO 2000 RPM WITH ANGULAR CONTACT PRECISION BEARINGS
- STARTING THIRD SHAFT WITH INSTANTEOUS FOOT BRAKE & CONTROL PANEL
- ELEC. COOLANT PUMP WITH TANK & FITTINGS
- REAR TOOL POST WITH TOOL HOLDER
- D1-4 CAMLOCK SPINDLE IN LIEU OF A2/4SPINDLE SPEEDS RANGING FROM 30 to 1250 RPM / 50 to 2000 RPM WITH SUPER PRECISION BEARINGS
- CHUCK /18”X4 JAW DOG CHUCK /10”X 3 JAW SELF CENTERING CHUCK /12”X 3 JAW SELF CENTERING CHUCK/QUICK CHANGE TOOL POST WITH FIVE TOOL HOLDER/REAR SPLASH GUARD/TOOL POST GRINDER: (A)EXTERNAL & INTERNAL COMBINED (W/O ELECTRIC MOTOR) (B) ONLY INTERNAL (C)ONLY EXTERNAL (D) 1 HP – 3 PHASE ELECTRICALS/ MT – 4 REVOLVING CENTRE /CONTROL PANEL WITH FOOT BRAKE/SET OF ANTI VIBRATION MOUNTS (A) 3050/1 TO 3050/4 (B) 3050/5 & 3050/7
- Low carbon alloy steel hardened strips for carriage guide ways
- Auto gear shifting
- Tool turret
- Full Enclosure
- Servo Drives for Spindle motor
- Heavy Boring attachment
- Roller bracket Steady rest
- Face Plate750 mm Φ (4310)900 mm Φ (5610 / 6610)
- Steady Rest
- Follow Rest
- Rapid Traverse of Main Slide
- Chuck Flange600 X 4 Jaw Dog Chuck750 x 4 Jaw Dog Chuck900 mm x 4 Jaw Dog Chuck
- Machine Lamp
- Electric Coolant Pump with Fittings
- Taper Turning Attachment 500 mm Center Height In Lieu of 430 mm600 mm Center Height In Lieu of 560 mm
- Low carbon alloy steel hardened strips for carriage guide ways
- Auto gear shifting
- Tool turret, Full Enclosure
- Servo Drives for Spindle motor
- Heavy Boring attachment
- Roller bracket Steady rest
